TERK Technologies owner manual The Lf-Univ Infrared Receiver Base Station, LF-UNIV Receiver

TK1259/LF-UNIV OM/New 4/2/03 05:07 PM Page 3

THE LF-UNIV INFRARED RECEIVER (BASE STATION)

LF-UNIV Receiver

aim front towards components

Your LF-UNIV Remote Control Extender Walls won’t stop the Remote Control Extender.

Your Remote Control Extender receiver receives the radio signals from the Leapfrog Transmitter module and converts them back into the original infrared signals.

LF-UNIV Receiver Placement: Place the receiver facing the components of your system. Extend the antenna. Plug the 110V adapter into your household AC outlet

and insert the jack on the adapter into the receiver unit. The LF-UNIV receiver will operate at any range from 3’ to 30’ from your components.

is always “ON” -- ready to receive your every command! You can use your remote control from almost anywhere!

Infrared Extension: The Extension can be used in situations where the Receiver can not be placed in front of the component(s) it is controlling. This device consists of an Infrared diode connected to a 8ft. extension wire and plug.