5-5
CHAPTER 6

CARE AND MAINTENANCE

SECTION I. UNIT CARE

6-1. GENERAL
Although the TI2000GPU-24 (Turbo Start 2000) has been ruggedized
and made weather resistant within the scope of unit’s intended use,
it is essential that good general care be taken to maintain unit in
good operating condition and to maximize unit’s operational life.
6-2. AFTER USE - Unit should be protected from the environmental
elements and man made hazards. Ideally unit should be secured in a
building or shed. Most importantly, unit shall be fully covered if
stored exposed to environmental elements.
1. KEEP UNIT RECEPTACLES AND OUTER CASE CLEAN - wipe with dry cloth.
2. KEEP FOREIGN OBJECTS OUT OF UNIT - Cover unit to prevent
foreign objects, water, and dirt from entering vent ports and recep-
tacles.
3. KEEP FROM PROLONGED EXPOSURE TO EXTREMELY DAMP ENVIRONMENTS
Cover unit to prevent migration of moisture. If unit is operated in
extremely damp environments unit should be kept in an environmentally
controlled building.
4. KEEP UNIT PLUGGED INTO AC POWER SUPPLY WHEN NOT IN USE. (

CHECK

FUSE WINDOW FOR PROPER SETTING

). To maximize life of power cells and
to ensure unit is always ready for use, unit should remained plugged
in to AC power when not in use. NEVER LET DISCHARGED UNIT SIT FOR
MORE THAN 24 HOURS WITHOUT FULLY RECHARGING POWER CELLS.
5. PROTECT DC POWER CABLE AND AC POWER CORD FROM DAMAGE - Prevent
from being cut, gouged, crushed, dragged or otherwise abused.