Avigo Quick Start Guide

5

∙Select a component you want to install (Avigo Manager, PUMA IntelliSync *synchronizer software, Lotus Organizer 97, or Adobe Acrobat), and then follow the prompts on the setup screens. Select the next component you want to install and repeat the install process.

Connect Avigo to Your PC

∙Set the Avigo dock station on a flat surface near your PC (Figure 1).

∙Connect the cable connector to the PC serial port you will use. If necessary, use a 9- pin-to-25-pin adapter. Make sure that all the connectors are connected securely (Figure 2).

Figure 1: Dock station Setup

Figure 2: Serial Port Connection

∙Position the Avigo over the dock station and slide it gently into the dock station. Make sure the grooves on the right and left sides of Avigo engage the alignment tracks in the dock station (Figure 3).

Figure 3: Docking the Avigo

∙Continue sliding Avigo into the dock station until the electronic pins in the dock station are engaged fully into Avigo.