20
TI30XAUS.DOC MURFE pruning Pat Hatcher Revised:
06/17/99 4:31 PM Printed: 06/17/99 4:32 PM Page 20 of 21
Battery Replacement (TI.30Xa)1. Remove slide cover. Place calculator face down.
2. Using a small Phillips screwdriver, remove screws
from back case.
3. Remove back case.
4. Remove discharged batteries.
Caution: Avoid contact with other calculator
components while changing batteries.
5. Install new batteries positive side up, as shown on
diagram inside case.
6. Replace back case, and then replace screws.
7. Press
}
|
|
.
Caution: Dispose of old batteries properly. Do not
incinerate batteries or leave where a child can find
them.
Your calculator cannot hold data in memory when
batteries are removed or become discharged.