Thermax 8510 manual Maintenance Instructions, Name of Parts, AIR Cleaning Procedure

MAINTENANCE INSTRUCTIONS

CLEANING AND STORAGE

1.Turn the unit OFF and unplug it before cleaning.

2.Use only a water dampened, soft cloth to clean the unit.

3.Never use solvents or other chemicals.

4.Store the unit in a cool, dry place when it is not in use.

REPLACING THE FILTERS

1.Remove and replace the HEPA filter, activated carbon filter at least every 6 months, and photo-catalyst filter at least every 12 months.

2.The life of the filters is affected by the amount of use and the concentration of pollutants in the air.

3.When replacing filters, please follow these instructions:

Loosen the screw Open the upper cover Replace the filters

ADDING THE THERMAX FRAGRANCE OILS (OPTIONAL)

(See back of manual for list of other fragrances and re-order info)

1.Refill / Replace the fragrance pad at least every 45 days.

2.Keep the fragrance pad away from children. NOT TO BE EATEN!

3.Please replace the fragrance as shown in following instructions:

Press the fragrance cover in	Turn the container over	Add the Essential oil(s)
and let it pop out again.	and slide the cover off.	of your choice to cotton pad.

NAME OF PARTS

Fragrance cover Upper cover

Outlet On/Off H/L Inlet

AIR CLEANING PROCEDURE

DIRTY

PURIFIED

AIR

AIR

IN

OUT

④ ②③② ①

Our unique two-fan system uses the fan on the right side to draw air

in from the room, to purify it as described below:

①HEPA Filter removes particles and contamination.

②Photo - Catalyst Filters work with UV Light to break down and destroy poisonous fume,VOCs,odors,germs,viruses,bacteria,mildew and fungus.

③Ultraviolet Light

④Activated Carbon Filter eliminates unpleasant smell.

Finally, the fan on the left side draws the purified air through the ionizing area and releases pure, ionized air back into the room.

-5-

-2-