Thermo-Serv 9901i, 9915i, 9920i TWO YEAR LIMITED WARRANTY

TWO YEAR LIMITED WARRANTY

The manufacturer warrants to the original contractor installer or to the original consumer user, each new

Robertshaw thermostat to be free from defects in materials and workmanship under normal use and serv-

ice for a period of two (2) years from the date of purchase.

This warranty does not cover batteries (if so equipped), damage caused by batteries, damage resulting

from improper installation, alteration, misuse or abuse of the thermostat occurring after the date of pur-

chase.

The manufacturer agrees to repair or replace at its option any thermostat under warranty provided it is

returned within the warranty period, postage prepaid, with proof of the date of purchase. Cost of thermo-

stat removal or reinstallation is not the responsibility of the manufacturer.

Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. This war-

ranty and our liability does not apply to merchandise that has been damaged caused by misuse, neglect,

mishandling, alterations, improper installation, or use in a way other than in accordance with the recom-

mendations and instructions of the manufacturer. Except to the extent prohibited by applicable law, any

implied warranty of merchantability or fitness for a particular purpose on this product is limited to the dura-

tion of this warranty.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limi-

tations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to

state.

Instructions for return:

Pack the thermostat carefully in a well-padded carton. Be sure to include a note describing, in detail, what

is wrong with the product. Return, postage prepaid, to:Climate Controls Americas 515 South

Promenade Ave., Corona, CA 91719, Attn: Warranty Department

For additional troubleshooting information, visit our web site at www.about-i-series.com. To talk with a service representative, give us a

call at 800-445-8299.

The thermostat automatically retains the time of day for approximately two hours in the event of a power outage. All other programmed

parameters are stored permanently in memory. So, if the power is out for more than two hours, simply reset the clock. See page 4.

To reset the thermostat to factory conditions, press the UP button and the LEFT button at the same time. Hold for 8 seconds. The time

of day will display 12:00 indicating a reset has occurred.

NOTE: This will erase all programming and return the thermostat to the factory conditions including the installer settings. Use this

only as a last resort.