Thermo Products thjd18 dimensions Model, Unit, Tabular Data Sheet, Physical and Electrical Data

TABULAR DATA SHEET

Outdoor Split System Heat Pump 1.5 Thru 5 Tons

MODELS: THJD18* THRU 60 13 SEER – R-410A, 1 PHASE

Physical and Electrical Data

MODEL		THJD18	THJD24	THJD30		THJD36	THJD42	THJD48	THJD60
		S41S3	S41S4	S41S4		S41S4	S41S4	S41S4	S41S4
Unit Supply Voltage					208-230V, 1 60Hz
Normal Voltage Range 1						187 to 252
Minimum Circuit Ampacity		11.9	11.2	14.1	19.7		20.9	25.6	34.9
Max. Overcurrent Device Amps 2		20	15	20	30		35	45	60
Min. Overcurrent Device Amps 3		15	15	15	20		25	30	35
Compressor Type		Scroll	Recip	Recip		Recip	Recip	Recip	Scroll
Compressor	Rated Load	9.0	8.3	10.6	14.7		15.7	19.4	26.9
Amps	Locked Rotor	48.0	43.0	54.0	74.0		88.0	88.0	135.0
Crankcase Heater		No	Yes	Yes		Yes	Yes	Yes	No
Factory External Discharge Muffler		Yes	No	No		No	No	No	Yes
Factory External Check Valve		No	No	No		No	No	No	No
HS Kit Required with TXV 4		No	Yes	Yes		Yes	Yes	Yes*	No
Fan Motor Amps	Rated Load	0.70	0.80	0.80	1.3		1.3	1.3	1.3
Fan Diameter Inches		24	24	24	24		24	24	24
	Rated HP	1/10	1/8	1/8	1/4		1/4	1/4	1/4
Fan Motor	Nominal RPM	825	1075	1075	850		850	850	850
	Nominal CFM	2000	2900	3000	3800		3800	3600	3600
	Face Area Sq. Ft.	15.7	18.3	21.0	23.6		23.6	23.6	23.6
Coil	Rows Deep	1	1	1	1		1	2	2
	Fin / Inches	22	22	22	22		22	18	18
Liquid Line Set OD	(Field Installed)	3/8	3/8	3/8	3/8		3/8	3/8	3/8
Vapor Line Set OD (Field Installed)		3/4	3/4	3/4	3/4		7/8	7/8	7/8
Unit Charge (Lbs. - Oz.) 5		6 - 6	9 - 6	9 - 0	10 - 0		9 - 10	14 - 12	13 - 13
Charge Per Foot, Oz.		0.62	0.62	0.62	0.62		0.67	0.67	0.67
Operating Weight Lbs.		172	194	206	218		218	285	284

*These models are shipped with a Hard Start Kit installed at the factory.

1.Rated in accordance with ANSI/AHRI Standard 110-2002, utilization range “A”.

2.Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3.Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.

4.See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.

5.The Unit Charge is correct for the outdoor unit, matched indoor coil, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

All dimensions are in inches. They are subject to change without notice.

Certified dimensions will be provided upon request.

	C
		Unit			Dimensions			Refrigerant Connection
						(Inches)		Service Valve Size
		Model		A1		B	C	Liquid	Vapor
		18		28		34	34
A		24		32		34	34		3/4”
		30		36		34	34	3/8”
		36		40		34	34
		42		40		34	34
		48		40		34	34		7/8”
	B	60		40		34	34
		1.	Including Fan Guard.

Thermo Products, LLC

MAC-220

ECN 5287-MA 121005