0. Installation

Place the amplifier on a hard and flat surface. The ventilation holes should not be covered. There has to be at least 5 cm (2 inches) free air on top of the amplifier.

To ensure long and trouble free operation we recommend:

-Do not expose the amplifier to direct sunlight.

-Do not place the amplifier in warm or dusty environments.

Caution: Because of risk of fire or electric shock, do not expose the amplifier to rain or moisture.

Caution: Because of risk of electric shock, do not open the amplifier.

1. Input selection

The input selection is very flexible, so it can suit many different home theatre and stereo installations. It is possible to switch between seven different inputs, which are directly accessed by keys on the front panel or on the remote control.

Each input can be configured in different ways, shown below with an “X”.

The factory settings are marked with [ ] brackets. Changes to this setting can be made under the config.input menu.

INPUTS

DVD

SAT

LD

TV

Tape 1

Tape 2

Pure A.

 

 

 

 

 

 

 

 

Analogue

 

X

X

[X]

[X]

[X]

[X]*

 

 

 

 

 

 

 

 

Coax digital

[X]

[X]

[X]

X

 

 

 

 

 

 

 

 

 

 

 

Dig. Direct

X

 

 

 

 

 

 

Optical

X

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Com.video

 

[X]

X

[X]

X

 

 

 

 

 

 

 

 

 

 

S-video

X

X

[X]

X

[X]

[X]

 

 

 

 

 

 

 

 

 

Component

[X]

X

 

 

 

 

 

 

 

 

 

 

 

 

 

*The Pure Audio input can be either XLR stereo or 6 channel RCA phono input.

For the audio signals, one of four options in the upper three rows must be selected under the config.input menu.

Similarly, the video inputs configuration must be selected for PR350B in the config.video-input-outputmenu. After video switching, the built-in adaptive comb filter converts the selected video source into component or RGB video format. Therefore, your projector or TV must be set correctly to either RGB or component, and the “intelligent” video switching in your PR350B will take care of the rest.

The Pure Audio input can be selected as both XLR balanced or unbalanced phono input. A short push on the “PURE AUDIO” key selects the XLR input. By holding down this button down for more than one second or double push on the remote control, you select the Pure Audio phono input. The Pure Audio input will bypass the DSP circuits and is recommended for high quality music listening in stereo e.g. from CD player or other analogue source.

Alternatively, for high quality music listening in stereo, connect the digital output from

___________________________________________________________________________

page 9