DYNAMIC LO (Dolby Digital)

Low level boost: 0.0 (disable low level boost) 0.1 0.2 0.4 0.6

1.0 (maximise low level boost)

6.7 Volume scale

It is possible to select two volume level settings: a progressive step size, where step size is large at low levels for rapid setting and small at normal listening levels, or a fixed 0.5 step size.

The progressive step size will be most convenient for most users and is therefore called “normal” and selected as default, while the fixed step size is called “full”:

“normal”:

0.0, 5.0 , 10.0, 15.0, 20.0, 22.0, 24.0,......38.0, 40.0, 41.0,

 

42.0,..... , 68.0, 69.0, 70.0, 70.5, 71.0, 71.5, .... , 99.5, 100

“full”:

fixed 0.5 dB step size from 0.0 to 100 ( 200 steps).

6.8 Saving set-up parameters in memory

In the menu MEM BANK, it is possible to store the set-up parameters in four memory banks, one for each surround mode: Stereo, ProLogic II, Dolby Digital and DTS. Following parameters are saved:

-Channel volume trims (L, C, R, SL, SR, SUB and LFE)

-Channel delay (SL, SR, C, SC)

-Speaker configuration

When you have completed your settings for one of the four above mentioned modes, you can save your settings by choosing the correct memory bank (Stereo, ProLogic II, Dolby Digital or DTS) by pressing “⇒ “ and then press “ENTER”.

The saved parameters will be reloaded each time a surround mode is changed. However, intermediate settings made “on the fly” will be maintained for each surround mode until the PR350 B is powered off or set into standby.

___________________________________________________________________________

page 17