Trouble Shooting…

Problem

No Sound

No Sound from one speaker

One speaker sounds distorted, lower volume or “different”

Treble or Bass

Please Check

∙Check the speakers are connected to the cable correctly.

∙Check the speaker cable is connected to the receiver amplifier correctly.

∙Check the receiver amplifier is powered “on” at the mains, is not on “mute”, has no headphones attached and that the Channels used for the exterior speakers (usually A or B) is in operation.

∙Refer to the owners guide that came with your receiver amplifier.

∙Most initial problems are connectivity, please try a different connection cable to your outdoor speakers or equipment.

∙Check the “balance” control on your receiver amplifier.

∙Check all connections and cable to the inoperable speaker.

∙1. Disconnect the “working” speaker from the receiver amplifier connection/ channel. Switch the cord from the non-operating speaker from its current connection to the “working” speaker connection. If the speaker now works the problem is your receiver amplifier.

∙2. Reconnect as original. Remove the speaker cable at the “working” speaker directly and connect it directly to the non-working speaker. If the speaker now works the problem is somewhere in the original speaker cable.

∙3. If the speaker still does not work the problem is the speaker.

∙Follow same procedure as above for “No Sound”.

∙Check the “tone” setting on your receiver amplifier.

∙Adjust the Treble and Bass settings on your receiver amplifier.

∙Check the connections carefully from the amplifier to your speakers and ensure correct Phase (+ to + and

– to – accordingly). Poor sound replication is expected from a speakers or speakers out of polarity or phase.