Operation Section 4-10
OPERATION
RBF-2C 07/04
© 2004 Alamo Group Inc.
6. PRE-OPERATION INSPECTION AND SER VICE
Before each use, a pre-operation inspection and service of the boom, attached head, and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped,
present and functional. DO NOT operate the unit if the pre-operation inspection reveals any condition affecting
safe operation. Perform repairs and replacement of damaged and missing parts as soon as noticed. By performing
a thorough pre-operation inspection and service, valuable down time and repair cost can be avoided.
¾Tire condition/air pressure
¾Wheel lug bolts are tight
¾Steering linkage
¾SMV sign is clean and visible
¾Tractor’s lights are clean and functional
¾Tractor Seat belt is in good condition
¾Tractor ROPS is in good condition
¾No tractor oil leaks
¾Radiator free of debris
¾Engine oil level and condition
¾Engine coolant level and condition
¾Power steering fluid level
¾Fuel condition and level
¾Sufficient lubrication at all lube points
¾Air filter condition

6.1 Tractor Pre-Operation Inspection/Service

Refer to the tractor operator’s manual to ensure a complete pre-operation inspection and scheduled service is
performed according to the manufacturers recommendations. The following are some of the items that require
daily service and inspection:
WARNING! Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners,
worn or broken parts, and leaky or loose fittings. Make sure all pins
have cotter pins and washers. Serious injury may occur from not
maintaining this machine in good working order. (SG-21)
DANGER! All Safety Shields, Guards and Safety devices including
(but not limited to) - the Deflectors, Chain Guards, Steel
Guards, Gearbox Shields, PTO integral shields , and
Retractable Door Shields should be used and main-
tained in good working condition. All safety devices
should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items
must be replaced at once to reduce the possibility of
injury or death from thrown objects, entanglement, or
blade contact. (SGM-3)