Tiger Mowers FLX15, FLX10 manual Bearing Mount Assembly

BEARING MOUNT ASSEMBLY

Ref.	Part No.	Description	Qty.
1	264-004	Retaining ring, internal	1
2	356-310	Locking Collar / Bearing set	1
3	A101-150	Bearing holder	1
4	A101-152	Rubber ring, vibration isolator	2
5	A101-153	Bearing stand	1
6	A101-155	Washer, 4-1/16" x 7 ga	1
7	264-014	Retaining ring, external	1
8	A101-154	Shield	1
9	270-007	Locknut, 1/2" UNC	4
10	256-011	Washer, 1/2"	2
11	250-057	Bolt, 1/2" x 2" UNC	2
12	273-006	Grease nipple, self tap	2
13	250-127	Bolt, 1" x 2-1/2" UNC	2
14	250-060	Bolt, 1/2" x 1-3/4" UNC	2
15	270-002	Locknut, 1" UNC	2
16	271-006	Cotter pin, 3/16" x 2"	1
17	257-009	Hex slotted nut, 1" UNC	1
18	256-001	Washer, 1" SAE type	1
19	A101-156	Bearing stand mount	1
20	256-017	Washer, 3/8"	4
21	250-018	Bolt, 3/8" x 1" UNC	4
22	255-013	Lockwasher, 3/8"	4
23	341-6241	SFT shield	1
24	A101-157	Spacer, 1.151" Long	1
	A101-158	Spacer, 0.871" Long	1
NOTE: USE LONG SPACER (ITEM 24, 1.151" LONG) FIRST AND IF TOO LONG TO
	ALLOW THE TRACTOR SHAFT TO BOLT ON USE SHORT SPACER (0.871" LONG)
FLX15/10 09/05		6-7