| 98 | 98 | |
|
| INSTRUCTIONS |
|
SPECIAL EXTENDED | SPECIAL EXTENDED | ||
WARRANTY OFFER | WARRANTY OFFER |
5 YEARS FOR 5 DOLLARS
For $5, Timex will extend the enclosed one year limited manufac- turer's warranty for an additional 4 years from date of purchase. This 5 year warranty covers repairs on your watch under the same terms and conditions as set forth in the manufacturer's warranty in this booklet.
Payment can be made with AMEX, Discover, Visa or MasterCard by calling
P.O. Box 1676, Dept. EF Little Rock, AR 72203.
We will need your name, address, telephone number, date watch purchased and 5 digit watch model number.
Payment must be made within 30 days after date of purchase.
Please read this booklet carefully to familiarize yourself with the operation of your Timex watch and with the Limited Warranty.
SECTION 1 – WATER-RESISTANCE
If your watch is
•30 Meter
•50 Meter
•100 Meter
160 p.s.i.a. (equals immersion to 328 feet or 100 meters below sea level).
WARNING: TO MAINTAIN
NOTES:
1.The watch is
2.Even though the watch may be
3.CROWN MUST BE SCREWED INTO THE CASE PRO- TRUSION TO ASSURE
4.Timex strongly recommends rinsing your watch with fresh water after exposure to salt water.
SECTION 2 – HOW TO START YOUR WATCH
To start your watch, remove the plastic guard from under the crown then push the crown in as far as it will go against the case to the "IN" position. The second hand should now advance at one second intervals.
SECTION 3 – HOW TO SET THE TIME
If your watch has a day of the week and date, first set the day of the week (see Section 4). If your watch has a date only, set the date first (see Section 5).
Timex watches either have a
2 POSITION CROWN | 3 POSITION CROWN | |
“OUT” | “OUT” | |
POSITION | POSITION | |
CROWN | CROWN | |
“IN” | “MIDDLE” | |
POSITION | ||
POSITION | ||
“IN” | ||
| ||
| POSITION |
To set the time, pull the crown to the "OUT" position of your watch. Slowly rotate the crown clockwise or counterclockwise to the desired time. Push the crown to the "IN" position to restart the watch.
SECTION 4 – HOW TO SET THE DAY OF THE WEEK
There are two types of Day/Date watches. The day is set either in the "MIDDLE" crown position or in the "OUT" position. To determine which version you have, pull the crown to the "MIDDLE" position and slowly rotate the crown counterclockwise.
“MIDDLE”
COUNTERCLOCKWISE
If the day changes, continue to rotate the crown until you reach the desired day. Then follow the instructions in Section 5 for setting the date.