BASIC SETUP
SETTING THE CLOCK MANUALLY
1)Battery Installation – remove the battery compartment cover on the back of the unit and install 2 FRESH “AA” batteries as shown here.
Manual Button
Functions
Up/Down
Arrows
TIME ZONE
SET TIME
ZONE
SET
“Set” to confirm manual settings
Back of Clock
2)Initial Setup – once the batteries are installed, the clock will power up. The display will appear as follows:
Time Zone will default to PST
(Pacific Standard Time)
Room Temp indicator |
| Signal Indicator | ||
| ||||
| will be flashing | |||
will be flashing |
|
|
| |
|
|
|
| |
The clock will begin searching for the Atomic signal
If the signal is AVAILABLE– the clock will receive the local time in
If the signal is NOT readily available – you can manually set the clock and calendar
(SEE MANUAL SETTING INSTRUCTIONS)
After the clock acquires the Atomic clock radio signal (this may take
3)Choose Your Time Zone – You must set your time zone so the clock will display accurate time once the atomic signal is received:
a.Select your time zone by repeatedly pressing the () ARROW until you see your time zone displayed on the LCD screen.
HAST | AKST | PST | MST | CST | EST | AST |
Hawaii Aleutian | Alaska Standard | Pacific Standard | Mountain Standard | Central Standard | Eastern Standard | Atlantic Standard |
Standard Time | Time | Time | Time | Time | Time | Time |
|
|
|
|
|
|
|
In the event you wish to manually change the clock settings, please use the instructions on the following page.
1) SETTING THE CLOCK & CALENDAR
a)Press the “SET” button for several seconds until the LCD screen is flashing.
b)Press the UP () ARROW button to select 12 Hr. (standard) or 24 HR. (Military) time format. Press “SET” to confirm.
c) The HOUR will flash | Press the UP () ARROW repeatedly, | Press “SET” | |
|
| until the correct hour (AM or PM) is | to confirm. |
|
| displayed. |
|
|
|
| |
d) The MINUTE will flash | Press the UP () ARROW repeatedly, | Press “SET” | |
|
| until the correct minute is displayed. | to confirm. |
|
|
| |
e) The YEAR will flash | Press the UP () ARROW repeatedly, | Press “SET” | |
|
| until the correct year is displayed. | to confirm. |
|
|
| |
f) The MONTH will flash | Press the UP () ARROW repeatedly, | Press “SET” | |
|
| until the correct month is displayed. | to confirm. |
|
|
| |
g) The DATE will flash | Press the UP () ARROW repeatedly, | Press “SET” | |
|
| until the correct date is displayed. | to confirm. |
|
|
| |
h) The ATOMIC CLOCK | Set the Atomic Clock ON or OFF by | Press “SET” | |
| CONTROL will flash | pressing the UP () ARROW button. | to confirm. |
|
|
|
|
i) | The DST will flash | Set DST (Daylight Saving Time) | Press “SET” |
|
| ON or OFF by pressing the UP () | to confirm. |
|
| ARROW button. |
|
|
|
|
|
j) | The F˚/C˚ will flash | Select F˚/C˚ (Fahrenheit or Celcius) by | Press “SET” |
|
| pressing the UP () ARROW button. | to confirm. |
|
|
|
|
