Timex T110 manual Operating the Alarm and Snooze Features, Operating the Dimmer

Operating the Alarm and Snooze Features

1.Set the alarm time and volume as described on Page 3.

2.Set the Alarm Mode Switch to “On.” The Alarm Icon will appear in the lower-left-hand corner of the clock display, indicating that the alarm has been set and will sound at the time selected.

Note: The alarm will continue to sound until it is shut off, or for a maximum of two hours. As long as the Alarm Mode Switch is set to “On,” the alarm will sound at the set time every 24 hours.

3.After the alarm sounds, press the Alarm Set/Reset Button to turn off the alarm while automatically resetting it for the following day.

4.To turn off the alarm without automatically setting it for the following day, slide the Alarm Mode switch to “Off.” Even if the Alarm Set/Reset Button was pressed, setting the Alarm Mode Switch to “Off” will turn off the alarm.

5.To use the snooze feature, press the Snooze Button. The alarm will turn off for approximately nine minutes before sounding again. You may repeat this process several times during the two-hour alarm cycle.

Operating the Dimmer

Use the Dimmer Switch to set the display to either a High or Low brightness setting.

4