Timex T120 manual Battery Backup Installation, Maintenance, To install the battery

Battery Backup Installation

In the event that the AC power cord is disconnected or a power failure or other interruption occurs, the Battery Backup will maintain clock and alarm settings for the life of the battery. During interruptions the display will be blank, but settings will be saved and automatically restored when AC power is again active.

To install the battery:

1.Open the battery compartment cover on the bottom of the unit.

2.Install one 9-Volt battery (alkaline is recommended for longer life), making sure that the large terminal matches to the large outlet.

Battery Compartment

The Battery Backup Indicator LED is located in the lower-right- hand corner of the display. The LED will light when no battery is installed, or when the installed battery is low on power.

Maintenance

•Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other protective material should be placed between the unit and the furniture.

•Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzine, thinner, or similar materials are not recommended, as they may damage the surface of the case.

•If the unit is not to be used for a prolonged period, such as a month or longer, remove the battery to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean it thoroughly and replace the battery.

•Do not remove or puncture clear film protecting the fragrance concentrate. Do not place open fragrance cartridge on finished surfaces.