Operating the Dual Alarm System

This clock radio features a dual alarm system, with two alarms that can be operated independently. The alarms can be set to wake two people at different times, or to have a main alarm and a backup. One alarm features your choice of radio stations as an alarm wake sound, while the second features a buzzer wake sound. You can set the radio alarm, the buzzer alarm, or both alarms.

Setting the Radio Alarm

1.Press and hold the J Radio Alarm Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will need to press the J Radio Alarm Button again.

2.While the display flashes, press the 4 Reverse and 8 Forward Buttons to set the wake time. Hold a button for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.

3.After setting the radio alarm time, you will need to select the station. First, press the 5 Radio Band Button to select a radio frequency. Next, select a station using the 6 Memory Set 1-6 Buttons. For more information on programming radio stations into memory, see the Programming Radio Station Settings section of this manual. Rotate the 9 Volume Thumbwheel to set the wake sound volume.

4.After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual. While the display is still flashing, press the N Date/7-5-2 Button until the desired setting is shown.

5.After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the 7 Enter Button. The Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set.

Setting the Buzzer Alarm

1.Press and hold the K Buzzer Alarm Button.

2.While the display flashes, press the 4 Reverse and 8 Forward Buttons to set the buzzer alarm wake time.

3.After setting the buzzer wake time, use the N Date/7-5-2 Button to select the 7-5-2 setting, as described in the above section.

4.After you have set the buzzer wake time and 7-5-2 setting, press the 7 Enter Button. The Buzzer Alarm Indicator will appear on the display, showing that the buzzer alarm has been set.

8

Page 8
Image 8
Timex T313 manual Operating the Dual Alarm System, Setting the Radio Alarm, Setting the Buzzer Alarm