Timex 896-095000, W-153-US warranty Thank YOU for Purchasing Your Timex Watch, Extended Warranty

www.timex.com

W-153-US896-095000

THANK YOU FOR PURCHASING YOUR TIMEX WATCH.

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex watch.

Your model may not have all of the features described in this booklet.

GENERAL OPERATION-FEATURES

➢INDIGLO button turns on the INDIGLO® night-light for three seconds.

➢MODE button cycles through Time of Day, Timer, Chrono, Recall and Alarm modes.

➢START/STOP button activates Timer and Chronograph, turns Alarm on/off, allows you to view day or month from Time display, and changes value of digits when setting different functions.

➢LAP/CLEAR/SET button sets digits for Time, Alarm, and Timer and records lap times in Chronograph mode.

Features include:

INDIGLO

MODE

START/ STOP

LAP/

CLEAR/ SET

•Countdown timer with preset times to 1 hour and bargraph display of remaining time

•Chronograph with lap storage • Alarm with 5-minute backup • 12- or 24-hour time format

•Day-Date or Month-Date date format • Automatic Set Return displays Time of Day if no button is pushed for 2-3 minutes in Set function.

SETTING TIME OF DAY, DATE AND ALARM

We’ve built setting reminders into the watch to simplify setting the Time of Day and Alarm, and made them consistent – once you know how to set Time, you can set the Alarm.

Press and hold LAP/CLEAR/SET to begin; a message will appear reminding you to hold button. After 2 seconds, you’ll see a series of reminders, showing you functions of MODE and START/STOP buttons and a reminder to press LAP/CLEAR/SET button when done.

➢Press START/STOP to change value of flashing number.

➢Press MODE to move to next digit (or digits) to continue setting time and date.

➢When done, press LAP/CLEAR/SET to save changes and exit.

Notes on Setting Time of Day, Date and Alarm

•Pressing any key during reminder messages will cancel them and let you start setting the watch.

•During setting, the reminder arrows will pop-up to help you remember which buttons to press.

•You can set the watch to display time in 24-hour format, sometimes called “military” or “international” time. Press START/STOP to change between 12 HR and 24 HR.

•You can set the date to display Month/Date or Day/Date. In regular Time mode (not Set mode), press and hold START/STOP for 3 seconds to change between Month/Date and Day/Date format.

•Whenever you set the Alarm, it will automatically arm itself. Refer to the Alarm section for more details.

USING THE TIMER

➢Press MODE until TIMER appears.

➢Press LAP/CLEAR/SET to select pre-set countdown times (15 and 30 sec, 1, 3, 5, 10, 15, 20, 25, 30, 45 min.; 1 hour). If set time is more than 30 minutes, a tone will sound at the half- way point.

➢Press START/STOP to start or stop Timer.

➢While Timer is stopped, press LAP/CLEAR/SET to set it to zero.

➢When Timer count reaches zero, a melody will sound. Pressing any button stops it. A bar- graph of time remaining in countdown appears in the Time display whenever the Timer is running.

USING THE CHRONOGRAPH

➢Press MODE until CHR appears.

➢Press START/STOP to begin running Chrono, press again to stop or pause. Chrono continues to run even if you exit the mode.

➢To take a lap, while Chrono is running, press LAP/CLEAR/SET. Lap time will appear frozen for 10 seconds. Chrono will then return to overall running time.

➢To clear Chrono to zero, with Chrono stopped, press and hold LAP/CLEAR/SET for 3 seconds.

RECALLING STORED LAPS

➢Press MODE until RCL appears.

➢Total workout time will be displayed.

➢Press START/STOP to scroll through stored laps.

➢Stored laps will be cleared when Chrono is reset and started again.

USING THE ALARM

➢Press MODE until ALARM appears.

➢Press LAP/CLEAR/SET to begin setting . Instructions for setting Alarm can be found above in “Setting the Time of Day, Date and Alarm”.

➢In regular Alarm mode (not Set mode), press START/STOP to turn Alarm feature on and off. Display will show “ON” or “OFF” to right of Alarm minutes. If Alarm is “ON”, it will generate a melody when Time of Day is the same as the Alarm time. As a reminder, when the Alarm is ON, an Alarm clock symbol will appear to the left of the date while in Time of Day.

➢Alarm melody will sound for 20 seconds, but can be stopped by pressing any button. If it is allowed to sound for the full 20 seconds, a backup alarm will automatically sound after 5 more minutes, much like a snooze feature.