10

Operating the Radio

1. Press the Radio On/Sleep Button once to turn on the radio.
Note: If the Radio On/Sleep Button is pressed more than once, the unit will enter the sleep mode, with
the radio operating on a timer. See Sleeping to the Radio Using the Timer for more information about this feature.
2. Press the Radio Band Button to select the AM band or one of the two FM bands. The Radio Band
Indicator will show which frequency is in use.
3. Press the Reverse and Forward Buttons to tune into a radio station. To scan the stations, hold a
button for about three seconds. The radio will rapidly advance to the next strong signal.
4. You may also use the Memory Set Buttons to select a preset radio station. See the Programming Radio
Station Memories section for instructions on programming radio station settings.
5. Rotate the Volume Thumbwheel to adjust the volume level.
6. Press the Off/Reset Button to turn the power off.

Programming Radio Station Settings

This Alarm Clock Radio features a total of 18 programmable radio settings: 12 FM stations and six AM stations.
These allow you to preset your favorite stations and access them quickly.
1. Press the Radio On/Sleep Button once to turn on the radio.
2. Press the Radio Band Button to select a radio band. The AM/FM Radio Indicator will show which
band is in use.
3. Press the Reverse and Forward Buttons to find a station to program into the memory.
4. When you have reached the station you wish to program, press and hold one of the six Memory Set
Buttons until you hear a beep. The radio station has now been programmed into that preset slot, and you
can reach the station by pressing its Memory Set Button while the radio is turned on.
5. Follow the above instructions to continue programming radio station settings into the memory. You can save
a total of 18 stations using the three bands.
6. To edit a setting, enter a different radio station as an existing Memory Set Button. This overrides the
original setting.
Listening to the Radio