•You may experience a delay in playback when inserting MP3 or WMA discs while the player reads the directory.
•Paper labels stuck to CDR/CDRWs may become loose and possibly damage the player.
•CDs with severe scratches may not play properly.
•Do not insert anything except a CD inside the loading slot.
•In the rare event you experience an error, press and hold the Eject button to
Reception/RDS:
The internal FM antenna (built into the power cord) will provide good FM reception. The supplied external FM antenna will usually provide improved reception. Fully extend the antenna and do not bundle it with the power cord or other cords. Locating the antenna near a window or outside wall will provide better reception than more interior locations. An outdoor antenna will provide the best possible reception. Another alternative is to use an optional FM dipole antenna (adaptor required). Connecting your cable television 75ohm coaxial cable to the external FM connection may also provide clear local reception, although you must usually request activation of this service through your cable company. Be sure to set the rear panel switch to “External” when using an external FM antenna. Otherwise, it should remain in the “Internal” position. This switch has no affect on AM reception. If a noisy FM station is received, setting the Audio button to “Mono” may help to clear up some of the multiplex noise. Route the power cord away from the antenna for best reception.
The Radio Data System (RDS) in the USA and Europe transmits text information along with audio broadcasts. Program Service data will be shown in the upper right corner when available. Not all FM stations utilize RDS, thus text data may not be present with some stations. For stations using RDS, text may not appear or may appear scrambled if the signal is too weak. Experimenting with the FM antenna location may improve RDS reception. RDS content is determined by each individual FM station, therefore if any data is shown incorrectly, this is not a fault of the unit. There are also limitations in terms of the kinds of characters that can be displayed. Therefore it is not unusual to see a different character or blank space in cases where the precise character can't be reproduced. Note RDS text will not be displayed in Sleep mode. RDS is not used on the AM band.
For AM, fold the included AM antenna’s integrated stand under the loop, (See Figure 11, page 10) snap it in position, and connect the male stereo mini jack to the female mini connector on the rear panel marked “AM Antenna”. Adjust for best reception for each AM station.
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household appliances, electric blankets, computers, and other electronic devices can also adversely affect reception or inject noise. If you experience this, move the Music System further from the offending device or plug it into an electrical outlet not shared by another device. Metal surfaces may hinder AM reception.
13
