13 Designed and manufactured in the USA with pride by TMIO, LLC • Chattanooga, TN • US toll-free +1.800.881.TMIO (8646) • www.tmio.com
Connect IoTM, Intelligent OvenTM, Intelligent OvensTM, Green CleanTM, and TMIO® are registered trademarks of TMIO, LLC.
j Make sure the oven is level, and securely fitted/
attached to the oven cabinetry.
k Reinstall oven door. See “Door Attachment”.
l Make sure to remove all internal packaging from the
oven cavity, and replace the oven racks.
m Make sure all oven vents and openings, including the
refrigeration panel, are clear and free of any obstruction.
n Some stainless steel parts will have a protective
plastic wrap. Peel off this plastic wrap. Remove all blue
plastic tape.
o Turn ON the power to the oven at the electrical box.
p Refer to Step 4, Network Connections (page 10, steps
2 – 7) to test and verify your Network Connections.
STEP 8. Final Checklist
INSTALLATION STEPS
DOOR ATTACHMENT:
i
i
• Place both hinge arms back in the
slots of the hinge receiver.
• Push the hinge arms in as far as they
will go until the bottom of the door
meets the frame of the oven. When
inserted properly, the hooks on the
hinge arms will automatically lock onto
the hinge receiver. When the hinge
arms are securely inserted and locked
into the hinge receiver, you will not be
able to pull the door out towards you.
• Lower the door gently.
• Rotate the catches back away from
you until the catches rest squarely
against the oven frame.
• The door can now be closed.
• If door appears tilted, it is not inserted
properly into the hinge receivers.
Remove the door and repeat Door
Attachment steps until door is correctly
aligned, and securely fastened.
• Repeat for the second oven door.
WARNING! Misuse of oven door
(e.g. stepping, sitting, or leaning
on them) can result in possible
hazards and/or injuries.
!
Door hinge
in unlocked
position
Door hinge
in locked
position
Hand grip position
for lower door
Hand grip position
for upper door