7
8. INSTALLATION

8.1. Using the Supplied Brackets

The speaker system is supplied with the following brackets. Use these brackets properly depending on the
installation location and intended application.
30º
[Wall bracket][Joint bracket][Speaker bracket]
8.1.1. When using only the supplied brackets
Wall
Ceiling
Speaker Stand
(Option)
When horizontal and vertical
angle adjustability is desired.
* Speaker coverage angles can only be adjusted in the vertical direction.
When close wall surface
mounting is desired*.
Vertical speaker mounting*
P. 8
P. 9
P. 10
P. 12
Mounting to the optional
ST-16A Speaker Stand
Installation
Location Application Wall bracketJoint bracketSpeaker bracket Page
8.1.2. When using both the supplied and optional mounting brackets
Ceiling
Pole
Partition
board
Horizontal speaker
mounting
Mounting to a
partition board
* Speaker coverage angles can only be adjusted in the vertical direction.
Suspended speaker
cluster mounting*
Mounting to a pole
HY-CM10B or
HY-CM10W
HY-CL10B
YS-60B
P. 11
P. 11
P. 13
Installation
Location Application Option Wall bracketJoint bracketSpeaker bracket Page
HY-BH10B P. 14

8.2. Speaker Cable Connections

[Input terminal polarity] [Stripped conductor of cable]
Sperker unit (rear)
Input terminal
(–)
BLACK
(+)
RED
(0.39’’ )
10 mm