3. HANDLING PRECAUTIONS

Use optional mounting brackets when mounting the speaker to the ceiling or wall.

Avoid using the speaker on the beach because the speaker's life can be greatly shortened by sea breezes.

TOA takes no responsibility for any accident or equipment failure due to inadequate installation places or incorrect installation methods or disassembly or modifications carried out for the purposes other than repair

service.

The F series speaker is not magnetically shielded. Install it as far away as possible from color televisions or

video monitors to avoid degradation in television picture quality.

4. FEATURES

Two-way bass-reflex system.

High efficiency, wide range, and high input power handling capacity.

F-160 series: High power capacity 13 cm woofer with a large 90 mm magnetic circuit, and high-efficiency

3 cm dome tweeter with a large 70 mm magnetic circuit.

F-240 series: High power capacity 16 cm woofer with a large 90 mm magnetic circuit, and high efficiency 3 cm dome tweeter with a large 70 mm magnetic circuit and a titanium diaphragm.

The tweeter employs a constant directivity horn which ensures uniform sound dispersion of 90 ° horizontal and 90° vertical.

Independent built-in overload protection circuitry for woofer and tweeter. (Low-impedance models only) A detachable rear cover cleanly conceals the speaker terminals.

Acoustically efficient polypropylene enclosure.

Optional wall and ceiling mounting brackets.

F-160WP: Drip-proof construction makes the speaker system ideal for outdoor use.

5. OVERLOAD PROTECTION CIRCUITRY INFORMATION

(LOW-IMPEDANCE MODELS ONLY)

The F-160G, F-160W, F-240G, and F-240W have a built-in overload protection circuitry.

If the excessive input is applied to a woofer or tweeter, the overload protection circuitry is activated and cuts off the signal supply to the speaker component.

A sudden drop of the volume level of either the high or low frequencies during speaker operation indicates that the overload protection circuitry has been activated. In such a case, reduce the amplifier volume and just

wait. The protection circuitry is automatically reset after approximately 3-30 seconds. After the circuitry is reset, set the volume at a lower level than before.

[Important Note]

This overload protection circuitry does not perfectly protect the speaker component. Depending upon the

excessive input to be applied, the protection circuitry may not operate, causing damage to the speaker

component. In addition, the circuitry may not be restored to the previous state if the excessive input is applied

continuously for long time. Take special care that the excessive input is not applied to the speaker during use.

4

Page 3 Page 5
Page 4
Image 4
TOA Electronics F-160WM, F-160WP, F-160GM, F-240WM, F-240GM instruction manual Handling Precautions, Features
Page 3 Page 5

F-160W, F-240W, F-160WM, F-240GM, F-240WM specifications

TOA Electronics is a renowned name in professional audio systems, and their series of loudspeakers, including the F-160WP, F-240G, F-160GM, F-160G, and F-240WM, stand as a testament to their commitment to quality and innovation. These models are designed specifically for efficient sound reproduction in various environments, including commercial spaces, educational institutions, and public venues.

The F-160WP features a robust weather-resistant design, making it ideal for outdoor applications. This model offers an adjustable angle, allowing users to direct sound precisely where needed. With a power handling capacity of 60 Watts and a frequency response range of 60 Hz to 20 kHz, the F-160WP is efficient in delivering clear and high-fidelity audio. Its durable cabinet construction ensures longevity even under harsh weather conditions.

Next in line is the F-240G, which is designed for indoor use. With a higher power handling capacity of 120 Watts, the F-240G can fill larger spaces with potent sound. This model utilizes a 2-way speaker system, comprising a 12-inch woofer and a compression driver, providing a wide dispersion of sound and clarity across frequencies. The F-240G’s elegant design makes it a visually appealing choice for modern interiors.

The F-160GM, another versatile option, is designed with a high-quality polypropylene cabinet that offers both durability and style. With a power handling capacity of up to 60 Watts and a frequency response extending from 70 Hz to 20 kHz, it effectively caters to various audio needs. Its lightweight construction allows for easy installation, making it an excellent choice for schools and conference rooms.

The F-160G is similar to the F-160GM but focuses on providing exceptional sound quality at a competitive price point. It features a 16 cm speaker driver that ensures consistent sound output, making it suitable for background music and voice announcements alike.

Lastly, the F-240WM combines versatility with robustness. It is equipped with a wide-dispersion speaker, delivering a full range of sound across various frequencies, ensuring clear voice projection and music playback. With its sleek design, the F-240WM can blend seamlessly into any environment while delivering high-performance audio.

In summary, each of these models brings unique features and technologies to the table, all while maintaining TOA Electronics' reputation for reliability and audio excellence. Whether for indoor or outdoor use, these loudspeakers are engineered to meet the needs of professionals seeking high-quality sound solutions.
Top Page Image Contents