1.5

SATELLITES

PERFORMANCE

SUBWOOFER

PERFORMANCE

Recommended amplifier power Maximum Sensitivity (2.83Volts @ 1m) Nominal impedance:

Frequency response (-6dB) Drivers:

Crossover frequency

Magnetic shielding:

Weight:

Dimensions H x W x D:

Finish

Supplied accessories

Optional accessories

15 - 100 watts 85dB

6ohm 140Hz-78kHz

HF: 15mm (5/8inch) titanium dome, Neodymium magnet system.

LF: 75mm (3 inch) paper cone

4.5kHz (mid to high) 140Hz (to subwoofer)

Yes

750gms (1.65lbs)

140 x 97 x 95mm

51/2 x 34/5 x 45/16 inch Silver or black

Wall mounting brackets

25 metres (82 ft 6”) speaker cable

Satellite floor stands available in matching silver & black

Power output

100W RMS

Frequency response (-6dB)

45Hz - 140Hz

 

 

Driver

200mm (8 inch) paper cone

Inputs

Twin line or speaker level

Power requirements

115 or 230V AC / 50 - 60 Hz,

 

switching facility on amplifier

 

panel, 160VA max.

Fuse ratings

AC100-120V / 60Hz - Fuse: T1.6A L /125V.

 

AC 220-240V / 50Hz - Fuse: T800mA L /250V

Additional features

ON / OFF/ AUTO power function

Weight

10kg (22lbs)

Dimensions H x W x D

400 x 230 x 405mm

 

15.75 x 9.0 x 16.0 inch

Finish

Silver or black

Due to our policy of continuous improvement, this is a specification update sheet that should be read along with the manual as it provides the latest correct information. All specifications may be subject to further change without notice.

IMPORTANT

A mains cable is supplied - where the moulded plug is fitted with a mains fuse, always replace with the same type and rating. If the fitted plug is unsuitable for your type of outlet sockets, it should be cut off and disposed of safely. The wires in the mains cable are coloured in accordance with the following code:

GREEN AND YELLOW

EARTH

BLUE

NEUTRAL

BROWN

LIVE

As the colours of the wires in the mains cable may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire that is coloured GREEN and YELLOW must be connected to the terminal in the plug that is marked either by the letter E, the earth safety symbol, or coloured GREEN or GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked by the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked by the letter L or coloured RED.

Ensure that the terminals are tightened securely, and no loose strands of wire are present. Ensure cord grip is clamped over outer sheath of cable, rather than over the wires.

FUSE PROTECTION

An additional mains fuse is provided in the IEC power inlet on the amplifier panel, removable with a screwdriver. A fuse of the same type and rating must always replace this.

The correct type is 5mm x 20mm Time Delay (Type T):

T1.6AL / 125V for AC 220-240V / 50Hz operation,

T800mAL/ 250V for AC100-120V / 60Hz operation.

Tannoy Limited, Home Audio Division, Coatbridge, Scotland, ML5 4TF.

Tel: +44 (0) 1236 420199 Fax: +44 (0) 1236 428230

e-mail: sales@tannoy.com www.tannoy.com

Tannoy adopts a policy of continuous improvement and product specification is subject to change.

FOR YOUR OWN PROTECTION

Store the complete packaging in case it is needed for re-use.

Never expose the unit to moisture, water and extremes of temperature or humidity. Specifically, the unit shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the unit. Allow 150mm behind the unit to allow for sufficient ventilation. Articles such as newspapers, tablecloths, curtains etc must not impede the ventilation. Do not operate with the rear panel facing a radiator or heater. No naked flame sources, such as lighted candles, should be placed on the apparatus.

Never remove the rear panel of the unit, as there is a risk of electric shock.

There are no user serviceable parts inside the unit. Always refer servicing to your Tannoy dealer or authorised service agent.

Avoid violent shocks to the unit during packing or transportation.

Do not plug the unit into the mains until all other connections have been made and checked.

Due to the powerful magnet within FX 5.1 subwoofer, do not place within 1m of a television or computer monitor.

When set to the 'standby' and 'off' functions, a small amount of current continues to flow to the apparatus when not in use. If not used for a long period of time, it is recommended that the apparatus is completely disconnected at the AC mains socket.

Terminals marked with the flash symbol are hazardous live and the external wiring connected to these terminals requires installation by an instructed person or the use of a ready-made lead or cord.

This apparatus is designed for use in moderate climates.

WARRANTY

Please complete and return the enclosed warranty registration document - this does not limit your legal rights. This equipment has been produced and tested with care and precision. It is built to give first class service and carries a 1-year warranty. If the equipment proves to be defective within this period for any reason other than accident, misuse, unauthorised modification or fair wear and tear, Tannoy will repair any such defect or, at our option, replace it without charge for parts, labour or return carriage. This warranty is given in addition to the customer's statutory rights.

If you suspect a problem with your loudspeakers, please contact your local Tannoy dealer who will be able to advise on appropriate action.

6481 0381

Page 2
Image 2
TOA Electronics FX 5.1 manual Yes 750gms 1.65lbs 140 x 97 x 95mm, Wall mounting brackets, Power output 100W RMS, 45Hz 140Hz

FX 5.1 specifications

TOA Electronics FX 5.1 is an advanced audio solution designed to enhance the sound experience in various environments, including theaters, conference rooms, and public spaces. This sophisticated audio system integrates cutting-edge technologies to deliver high-quality sound reproduction.

One of the main features of the FX 5.1 is its ability to provide a true surround sound experience. It utilizes a 5.1 channel configuration, which consists of five full-range speakers and a subwoofer. This setup allows for immersive audio that envelops the listener, making it ideal for applications such as film, music playback, and live performances. The system's ability to create a three-dimensional soundstage significantly enhances the audience's engagement.

The FX 5.1 is equipped with advanced signal processing capabilities, allowing for precise audio adjustments. This includes customizable equalization settings, dynamic range control, and matrix mixing options. Users can fine-tune the audio output to suit specific environments or preferences, ensuring optimal sound delivery regardless of the setup.

Another standout characteristic of the TOA FX 5.1 is its versatility. It can seamlessly interface with various audio sources, including microphones, mixers, and external devices. The system features multiple inputs and outputs, facilitating easy integration into existing sound systems or standalone operations. This modular approach not only simplifies installation but also makes the FX 5.1 a flexible choice for a wide range of applications.

Moreover, the FX 5.1 benefits from TOA's commitment to build quality and durability. The components are designed to withstand the rigors of frequent use in commercial settings. This reliability ensures that the system delivers consistent performance over time, reducing the need for frequent maintenance.

The system also incorporates user-friendly features, including a straightforward interface for sound adjustment and monitoring. This allows both professionals and novices to easily operate the FX 5.1 without requiring extensive training.

In summary, TOA Electronics FX 5.1 stands out as a robust audio solution that combines innovative technologies with ease of use and excellent sound quality. Its versatility, durability, and advanced features make it an ideal choice for various applications, from entertainment venues to corporate environments, ensuring that users can rely on it for superior audio experiences.