[Rear Panel]

For technical details of each input and output, refer to the section "8. SPECIFICATIONS".

Monaural input terminals (1,2) [MIC, LINE]

Select either MIC or LINE for connection. If both are connected, LINE input takes precedence.

Stereo input jacks (3-6) [L , R]

Only CH6 RCA jacks are connected in parallel with phone jacks.

Stereo sub-input terminals [SUB IN STEREO L / M, R]

Signals from these terminals are assigned to stereo output buses that go to the stereo output. Connecting

only "L" will input to both "L" and "R".

Monaural sub-input terminals [SUB IN MONO 1,2]

Signals from these terminals are assigned to monaural output buses that go to monaural output 1 and 2.

Recording output jacks [REC L , R]

 

These stereo recording jacks output the signal from the

stereo output bus.

Stereo output jacks [STEREO OUT L , R]

 

Monaural output jacks [MONO OUT 1, 2]

 

These jacks also function as stereo sum outputs

by internal switch setting. (Refer to the section

"5. INTERNAL SWITCH SETTINGS".)

 

AC inlet

 

Connect the supplied power cord to this inlet.

 

4

Page 4
Image 4
TOA Electronics M-243 operating instructions Rear Panel