TOA Electronics RS-232C

00H: Loudness OFF

01H: Loudness ON

Example: Setting the loudness compensation of Output Channel 2 to ON

ABH, 03H, 01H, 01H, 01H

5.9. Filter Settings

Perform Filter (HPF/LPF) settings of Input / Output channels. 9000Series Amplifier

responds with the same data as the receipt.

Note: Command cannot be received during power off.

A2H, 04H, <Channel Attribute>, <Channel Number>, <HPF/LPF>, <Value>

00H: Input channel

01H: Output channel

00H - 07H (Input channel 1 - 8)

00H - 07H (Output channel 1 - 8)

00H: High Pass Filter

Page 17 of 24

Contents

Main Page 1. SUMMARY 2. SERIAL PORT SETTING 3. COMMAND CONFIGURATION 4. TRANSMISSION DATA AFTER COMMAND RECEPTION 5. CONTROL COMMAND AND SETTING VALUE CHANNEL FADER GAIN - POSITION V/S GAIN TABLE Page Page CHANNEL FADER GAIN STEP UP / STEP DOWN TABLE Page CROSSPOINT GAIN TABLE Page Page Page TONE CONTROL GAIN POSITION TABLE can be valid only when EQ is set to ON. EQ-GAIN TABLE EQ-Q TABLE <Freq Value> EQ-FREQUENCY TABLE Page 01H: Low Pass Filter <Frequency Value> HIGH PASS FILTER TABLE 00H LOW PASS FILTER TABLE 01H ACH, 02H, <Channel Number>, <Value> <Channel Number> 00H - 07H (Input channel 1 - 8) INPUT SENSITIVITY TABLE 6. Page 7. SPEAKER PRESET TABLE 8. COMMAND LIST Page 9. COMMUNICATION EXAMPLES Page 24 of 24