10. SPECIFICATIONS
Model No. |
| ||
Microphone Element | Dynamic type |
| Electret condenser type |
| Cardioid pattern |
| Cardioid pattern |
|
|
|
|
Emission |
| F3E | |
|
|
| |
Frequency Range | 690 – 865 MHz, UHF | ||
|
|
|
|
Selectable Channel |
| 16 channels | |
|
|
|
|
RF Carrier Power |
| Less than 50 mW | |
|
|
|
|
Tone Frequency |
| 32.768 kHz | |
|
|
|
|
Maximum Input Level | 130 dB SPL |
| 125 dB SPL |
|
|
|
|
Maximum Deviation |
| ±40 kHz | |
|
|
|
|
Audio Frequency Response | 100 – 12,000 Hz |
| 200 – 12,000 Hz |
|
|
| |
Dynamic Range (AF Circuit) | More than 100 dB (with | ||
|
|
|
|
Battery |
| 6LR61 (9 V x 1) | |
|
|
| |
Battery Life | More than 10 hours (alkaline) | ||
|
|
| |
Indicator | Power/Battery lamp (orange LED) | ||
|
|
|
|
Antenna |
| ||
|
|
|
|
Operating Temperature |
| ||
|
|
| |
Finish | Resin, coating, dark gray | ||
|
|
|
|
Dimensions | ø50 x 235.2 mm |
| ø45 x 235.2 mm |
|
|
|
|
Weight | 270 g (with battery) |
| 250 g (with battery) |
|
|
|
|
Note: The design and specifications are subject to change without notice for improvement.
• Accessories |
|
Microphone holder (with stand adapter) | 1 |
Screwdriver (for setting) | 1 |
Storage case | 1 |
License requirement
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Printed in Taiwan 133 - 07 - 180 - 90
