4. Hand Blender Use and Care Guide
5. Grasp unit in hand. To prevent splattering, place blade-end of
blender to the bottom of container before turning on.
6. The hand blender has two speeds: LO and HI. Press and hold the
speed switch to the desired setting for continuous blending. Slowly
move the blender through the food up, down and sideways.
Blending action stops when switch is released. For short “burst” of
blending, push and release the Lo or Hi speed switch. Note: Do not
immerse the blender in food or liquid above the Indicator Line.
7. Unplug from outlet and clean after each use, see CARE AND
CLEANING.
Hints For Using Your Hand Blender
◆During use, it is normal for suction to be created at the bottom of
a mixing container.
◆To avoid splattering, never lift blender out of ingredients while
motor is on.
◆Do not use for hard foods, rinds, heavy batters or doughs.
◆Do not use to blend hot foods.
◆This appliance is not intended to chop ice. Add ice to beverage
after blending.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Refer it to a
qualified appliance repair techinician if servicing is needed.
Care And Cleaning
1. Unplug from outlet.
2. Hold the blade end of the blender under warm running water to
rinse clean.
3. If food is not easily rinsed off the blade, place a drop of dish detergent
in a mixing container with warm water. Plug cord into outlet. Immerse
the blade end portion and operate the unit for about 10 seconds.
Unplug, rinse under warm running water, then dry.