•Burns can occur from touching hot metal parts, hot water or steam. Use
caution when turning the iron upside down as there may be hot water in
the system.
•Do not allow cords to touch hot surfaces. Let iron cool completely before
putting away. Loop cords loosely around iron when storing.
•Always store the iron face down on the heat resistant pad or on its heel
rest. This will allow air to circulate around the soleplate.
•Do not operate any damaged appliance. Do not operate with a dam-
aged cord or plug, or after the appliance malfunctions, or has been
dropped or damaged in any manner. Do not disassemble the iron.
Return appliance to the nearest authorized service center for examina-
tion, repair or mechanical adjustment.
•The iron should be set to MIN before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet, instead, grasp plug and pull
to disconnect.
•Use iron only as indicated in these instructions.
SPECIAL INSTRUCTIONS•This is a high wattage appliance. To avoid a circuit overload, do not
operate another appliance on the same circuit. If an extension cord is
absolutely necessary, a 13 ampre cord should be used. Cords rated for
less amperage may overheat. Care should be taken to arrange the cord
so that it cannot be pulled or tripped over.
•This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
This product is for household use only.
SAVE THESE INSTRUCTIONS2