How to Use the Speaker and Amplifier

The audio stand incorporates a built-in amplifier and speaker, a 3.5mm audio jack, a stereo input cable, and a "holder" that will hold many popular portable audio players.

1.Plug the power cord that extends from below the stand into a 120V AC outlet.

2.Turn on the amplifier speaker by "rocking" the power-on switch which is located under the stand. (See fig 5).

3.Power light underneath the "holder" will show when system is turned on.

4.Plug stereo input cable into the audio jack.

5.Plug the stereo input cable into portable audio player.

6.Turn on audio player, starting with the volume low and then adjust to desired level.

7.Place player into holder.

Servicing Instruction:

Caution: “These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so”

*The specification of slow blow type current fuse: Manufacture: Walter Electronic Co., Ltd

Type: BTP

Rating: 1A, 250V

SPEAKER SPECIFICATIONS:

1.POWER On/Off: Yes

2.Frequency Level: 55~18 KHz

3.Power Supply: AC

iPOD® MP3 Holder

iPOD® MP3 Holder

Power Light

Audio jack

Fig. 5

Power switch

10