User Maintenance Instructions
CAUTION: To avoid accidental burns, allow your Grilling Machine to cool thoroughly before cleaning.
1.Before cleaning, unplug the Grilling Machine from the wall outlet and allow to cool.
CAUTION: To avoid any sparks at the outlet while disconnecting plug, make sure the "Power Light" is off (not illuminated) before disconnecting the plug from the outlet.
2.Inside cleaning: Place the Drip Tray under the front of the Grilling Machine. Using the specially designed spatula, scrape off any excess fat and food particles. Wipe the plates with absorbent paper towel or a sponge. Run off will drip into the Drip Tray.
3.Stubborn
4.Empty the Drip Tray and clean with warm soapy water. Wipe dry.
5.Outside cleaning: Wipe with a warm, wet sponge and dry with a soft, dry cloth.
To clean the Bun Warmer surface, simply wipe with a clean, damp cloth or sponge. Do not use harsh or abrasive cleaners.
6.Do not use steel wool, scouring pads, or abrasive cleaners on any part of the Grilling Machine.
7.DO NOT IMMERSE IN WATER OR OTHER LIQUID.8.Any servicing requiring disassembly other than the above cleaning must be performed by a qualified electrician.
9.Make sure to hold the top cover (Lid) by hand while cleaning to pre- vent accidental closing and injury.
10.Once the Grilling Machine is completely cooled and cleaned, the Power Cord may be wound using the Cord Storage area on the bot- tom of the unit. Do not put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.
8