◆Always use fresh, cold water for brewing. In areas with hard water or where water contains a high mineral content, use cold filtered water for optimal coffee taste.
◆For best results, use a premium, fine grind, roast coffee.
◆Use a #4 paper cone filter or a permanent gold filter.
Setting the Clock/TimerSETTING THE CLOCK
1.Plug the power cord into a wall outlet. The display will flash until the time of day is set.
NOTE: A power failure will also cause the display to flash and it will be necessary to reset the clock.
2.To set the clock, hold the HOUR button in for 3 to 5 seconds until the hour setting begins to change. Press the HOUR button until the correct hour is displayed, noting that PM is indicated on the left of the display.
3.Press the MIN button until the correct minutes are displayed. A few seconds
after you release the button, the colon between the hour and the minutes will begin to flash, indicating that the clock is running.
SETTING THE TIMER
1.While holding the PROGRAM button down, press and hold the HOUR button until the hour display begins to change. The coffee cup icon on the left of the display will flash to indicate you are programming the timer. Continue to press the HOUR button until the correct hour is displayed for the brew time you would like to set, noting that PM is indicated on the left of the display.
2.While holding down the PROGRAM button, press the MIN button in the same way until the desired brew time is shown.
3.After the brew time is set, press PROGRAM again to return the display to time of day.
4.Pressing the PROGRAM button toggles the timer on and off. The coffee cup icon indicates when the timer is on.
8.