Before First Use

1.Carefully unpack your Toaster and remove all packaging materials.

2.To remove any dust that may have accumulated during packaging, simply wipe the Toaster exterior with a clean, damp cloth.

3.Do not use abrasive cleansers.

4.Do not put the Toaster, cord or plug in water.

5.Plug power cord into a 120V AC electrical outlet.

6.Before toasting for the first time, operate Toasting Slots without bread and with the Browning Selector Knob set at Dark (#7), the maximum setting. This will help to burn off any dust or manufacturing oils, etc. which may have accumulated on the elements. The new elements may give off an unpleasant smell but this is normal for a new Toaster. Make sure the room is well ventilated while doing this.

Selecting Toast Color

The Browning Selector Knob is located on the front of your Toaster. Turn the Knob to the desired toast color: Light (#1) is for warming and very light toasting; Dark (#7) for dark toasting. The numbers are a guide to help you select your desired color (the higher the number, the darker the toast).

The first time you toast, it is best to use both Toasting Slots; position the Browning Selector Knob mid-way between Light and Dark settings (#3 and #4); then adjust each subsequent toasting to your preference.

Cancel Button

If you wish to stop the toasting cycle before it is complete, press the CANCEL Button. The elements will be turned OFF, the toast or toaster food will pop up.

5.