Before First Use

1.Carefully unpack your Toaster and remove all packaging materials.

2.To remove any dust that may have accumulated during packaging, simply wipe the Toaster exterior with a clean, damp cloth.

3.Do not use abrasive cleansers.

4.Do not put the Toaster, cord or plug in water.

5.Plug power cord into a 120V AC electrical outlet.

6.Before toasting for the first time, operate both pairs of Toasting Slots without bread and with both of the Browning Selector Knobs set at Dark (#7), the maximum setting. This will help to burn off any dust or manufacturing oils, etc. which may have accumulated on the elements. The new elements may give off an unpleasant smell but this is normal for a new Toaster. Make sure the room is well ventilated while doing this.

Selecting Toast Color

Both Browning Selector Knobs are located on the front of your Toaster. Adjust one or both of the Knobs to the desired toast color: Light (#1) is for warming and very light toasting; Dark (#7) for dark toasting. The numbers are a guide to help you select your desired color (the higher the number, the darker the toast).

The first time you toast, it is best to use both pairs of Toasting Slots; position the each Browning Selector Knob mid-way between Light and Dark settings (#3 and #4); then adjust each subsequent toasting to your preference.

Cancel Buttons

There are 2 CANCEL Buttons, one for each pair of Slots. If you wish to stop the toasting cycle before it is complete, press the corresponding CANCEL Button. The elements will be turned off, the toast or toaster food will pop up.

5.