Operating Instructions
BEFORE FIRST USE
1.Carefully unpack your Toaster and remove all packaging materials.
2.To remove any dust that may have accumulated during packag- ing, simply wipe the Toaster exterior with a clean, damp cloth.
3.Do not use abrasive cleansers.
4.Do not put the Toaster, cord or plug in water.
5.Plug power cord into a 120V AC electrical outlet.
6.Before toasting for the first time, operate both pairs of Toasting Slots without bread and with both of the Browning Selector Knobs set at Dark (#7), the maximum setting. This will help to burn off any dust or manufacturing oils, etc. which may have accumulated on the elements. The new elements may give off an unpleasant smell but this is normal for a new Toaster. Make sure the room is well ventilated while doing this.
Selecting Toast Color
Both Browning Selector Knobs are located on the front of your Toaster. Adjust one or both of the Knobs to the desired toast color: Light (#1) is for warming and very light toasting; Dark (#7) for dark toasting (see Figure 2). The numbers are a guide to help you select your desired color
(the higher the number, the darker the toast).
The first time you toast, it is best to use both pairs of Toasting Slots; position each Browning Selector Knob to the middle setting (#4); then adjust each subsequent toasting to your preference.
Figure 2
5.