Topcom 1801 Cleaning, Disposal of the device environment, Water box, Water flume, Transducer

TOPCOM Ultrasonic Humidifier 1801

6Cleaning

6.1Water box

•Drop a few drops of detergent into the water tank.

•Fill it half with water and shake it up and down several times.

•Remove the dirty water and use clean water to rinse the box.

6.2Water flume

If there is waste left in the water flume, use a soft cloth to clean it.

6.3Transducer

When you use hard water, there will be some waste left on the transducer (J).

Use the brush tool that you can find in the water flume, together with water, to clean the transducer.

J

7Disposal of the device (environment)

At the end of the product lifecycle, you should not throw this product into the normal

household garbage but bring the product to a collection point for the recycling of electrical

and electronic equipments. The symbol on the product, user guide and/or box indicate this.

Some of the product materials can be re-used if you bring them to a recycling point. By re- using some parts or raw materials from used products you make an important contribution

to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area.

Batteries must be removed before disposing of the device.

Dispose of the batteries in an environmental manner according to your country regulations.

6