Topcom 2511 manual Procedure

TOPCOM BPM WRIST 2511

11.2Procedure

AM

PM mon. d

mem.

AM

PM mon. d

mem.

AM

PM mon. d

mem.

AM

PM mon. d

mem.

1.Press the POWER button. All digits will light up, checking the display functions. The checking procedure will complete after about 2 seconds.

2.After all symbols appear, the display will show "0" with the designated Memory Zone.

3.After initialisation the monitor automatically inflates the cuff to approximately 180 mmHg. The measurement will begin.

This monitor will re-inflate automatically to approximately 220mmHg if the system detects that your body needs more pressure to measure your blood pressure.

4.When the measurement is completed, systolic, diastolic and pulse will be shown simultaneously on the LCD screen.

When a mistake was detected during measurement the Error mark appears on the display

10