Topcom 3350 manual Setting the volume, Paging, Flash button R, Setting the ring volume and melody

Topcom Butler 3350/Twin/Triple/Quattro

5.7Setting the volume

During a conversation you can set the volume by pressing the Volume button . You can set the volume alternatively in Hi, Medium and Low.

The hands free receiver volume is also adjustable as above described!

5.8Paging

When you press the Paging button on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset.

5.9Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have a telephone exchange.

5.9.1 Setting the Flash time

•Press and hold the redial button for 3 sec.

•The display will show: ‘S’ for 100ms

or ‘L’ for 250ms

•The flash time setting will disappear after 2 sec. from the display

5.10 Setting the ring volume and melody

5.10.1 Handset melody

•Press and hold the melody button until the current melody is heard.

•Select the desired melody (1-9) by means of the scroll keys or by entering a number (1 - 9).

•Press again to confirm the setting

5.10.2 Handset ring volume

•Press the volume button in standby

•The handset will ring in the current volume

•Press 1-5 or use the scroll keys to select the desired volume

•Press ’0’ to turn the volume OFF

ENGLISH

Topcom Butler 3350/Twin/Triple/Quattro 11