Cocoon 80
3 Battery Empty indication
When the battery is empty, the handset no longer carries out operations. When a battery is completely empty and you have put the handset on the base unit for a short period of time, the Battery symbol will appear to be fully charged but this is actually not the case. The battery capacity will decrease rapidly. We advise you to put the handset on the base unit for the entire night so that it can be recharged thoroughly.
•Full battery [ 
]
•Empty battery [ 
]
When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal every 8 seconds. After
2 minutes the handset will be deactivated. Place the handset on the base unit to charge (the keypad upwards).
4 Operation telephone
4.1Outgoing calls
4.1.1 Making a phone call
•Press the Line button. You will hear the dial tone.
•Enter the desired telephone number.
•Press the Line button when you want to terminate the call.
4.1.2Call setup with dial preparation
•Enter the desired telephone number. An incorrect number can be corrected by means of the Mute button. When you haven’t pressed a button for 20 seconds, the number you’ve already entered will disappear and the handset returns to standby mode.
•Press the Line button. The number will be dialled automatically.
•Press the Line button when you want to terminate the call.
4.2Incoming calls
•When a call comes in, only the handset will start
to ring. The PHONE symbol 
blinks on the display.
•Press the Line button to answer the incoming call.
•When you pick up the handset from the base unit you are immediately connected to the caller. You do not need to press the Line button.
21
