Topcom 871 manual Using the Adsl Modem, TOP Leds, Rear Ports

XPLORER 871 24

2. USING THE ADSL MODEM

2.1 THE TOP LEDS

		1 2 3 4 5	6 7
	LED	Meaning
1	SYS	Flashes when the router is working properly.
2	ADSL RXD	Flashes when receiving data.
3	ADSL TXD	Flashes when transmitting data.
4	ADSL SYN	Lit green when ADSL physical layer is connected.
5	LAN LNK	Lit green when the LAN link is up.
6	LAN ACT	Flashes when there is activity on the LAN port.
7	PWR	Lit green when power adapter is connected.

2.2 THE REAR PORTS

	Power		USB	LAN	LINE
Power (jack)		Connect the supplied power adapter to this jack.
USB (USB connector)		Connect the supplied USB cable to this port when connecting to the PC.
LAN (RJ-45 connector)		Connect the supplied crossover cable to this port when connecting to a NIC
		(Network Interface card) in PC. Connect an UTP Ethernet cable to this port
		when connecting to a LAN such as an office or home network.
LINE (RJ-11 connector)		Connect the supplied RJ-11 cable to this port when connecting to the ADSL.