8.15. PABX PAUSE FUNCTION
You can program 3 groups of PABX code numbers (each of maximum 2 digits). If
the first 1 or 2 digits (according to the programmed PABX code) of the dialed
digits match one of the PABX code programmed, a pause time will be
automatically inserted to the dialing buffer. This pause time can also be
programmed in program mode.
8.15.1. SET PABX ACCESS NUMBER
•Press the set button again
.
• Press <3> .
•The LCD display will show “PAB[1][2][3]” to inform the user to select 1,2 or 3
PABX group (LCD version only).
•Press <1>, <2> or <3> to select the PABX programming group.
•The LCD display will show the present setting of the selected group (LCD
version only).
•For example, if the PABX group 2 is disable, it shows “PAB2=OFF” (LCD
version only).
•Or for example, if the PABX group 2 setting is a short pause (1P) with
digits 62 as PABX code, it shows “PAB2=1P62” (LCD version only).
•Press <1> or <2> to select the length of the pause time
<1> - 3 seconds pause (1P at LCD)
<2> - 7 seconds pause (2P at LCD)
• Press PABX access number, <1>...<9>,<0>. (maximum 2 digits)
•Press the set button to confirm the entry.
•This is the “Automatic dialing pause” time needed when dialling an outside
number between the access code and the first digit.
•Maximum 3 settings are allowed for the PABX access code and access time.
•Maximum 2 digits for each setting
•The settings will be erased after going through the procedure “Clear all
memory”.
8.15.2. ERASING A PABX GROUP
• Press the set button again
.
• Press <3>.
•The LCD display will show “PAB[1][2][3]” to inform the user to select
PABX group 1,2 or 3 (LCD version only).
•Press <1>, <2> or <3> to select the PABX programming group.
•The LCD display will show the present setting of the selected group (LCD
version only).
• Press the set button to confirm the erase.
8.16.<R> FUNCTION PROGRAMMIMG• Press the set button again
.
• Press <2>.
•The LCD display will show “[r]= ” the present signalling <R> key setting (LCD
version only).
•Press function code, <2>, <3>, <4>, <5> for different flash time.
<1> = not available
<2> = Flash : 100ms (r = flash 1)
<3> = Flash : 115ms (r = flash 2)
<4> = Flash : 270ms (r = flash 3)
<5> = Flash : 600ms (r = flash 4)
•The LCD display will show the selected setting (LCD version only).
•Press the set button again to confirm your entry.
8.17. CLEAR ALL MEMOR Y• Press the set button again
.
• Press <1>.
•The LCD display will show “Clear All” (LCD version only).
• Press the set button again to confirm to clear all memory.
• The following settings are changed:
1. Redial memory is erased
2. All phone number memories are erased
12 13
50 50