Topcom Fidelity 1081
5 Buttons
(See picture 1 and 2 on folded cover page)
1.Hook Switch
2.Up button ‘ 
’
3.LCD display
4.Down button ‘ 
’
5.Delete button ‘ 
’
6.Numerical key pad
7.Hands free button ‘
’
8.Redial button ‘
’
9.Handsfree LED
10.Emergency button ‘ ! ’
11.Flash button ’R’
12.Hands free speaker
13.Wall mounting hook
14.Line cord connector
15.Power adapter connector
16.Ring volume switch
17.Wall mounting locations
18.Ringer
19.Cable slots
20.Handsfree microphone
21.Handfree volume switch
6 Technical Data
Dialling options: DTMF(tone) / PULSE Flash:100/300/600ms
Power adapter: Input 230VAC 50Hz / Output 6VDC - 400 mA
7 Installation
To activate the telephone, it must be connected to the main power.
•Plug one end of the supplied adapter into the electric socket and the other end into the connector on the bottom of the desktop telephone (15).
•Connect one end of the line cord to the telephone line wall socket and the other end to the bottom of the phone (14).
8 Telephone settings
8.1Setting the date and time
When you have a subscription to the Caller ID service and your telephone provider sends the date and time together with the telephone number, the phone’s clock will be set automatical- ly.
3sec | is displayed. |
Select ‘ 
’(Date Time)
Enter the day, month and time (4digits) using the numerical keypad.
To confirm.
8.2Flash time
Press R to use certain services as ‘Call Waiting’ (if this service is provided by your telephone com- pany); or to transfer phone calls when you are us- ing a telephone exchange (PABX).
The flash time can be selected (100/300/600ms).
3sec | is displayed. |
3sec Select ‘
’(Flash time)
To confirm
Select ‘100’, ‘300’ or ‘600’ ms
To confirm
8.3Dial Mode (Tone/Puls)
3sec | is displayed. |
Select ‘ 
’(Dial mode)
To confirm
Select ‘TONE’ or ‘PULSE’
To confirm
8.4Ringer volume
The ring volume can be adjusted by means of the Ring Volume switch (16) at the bottom of the phone.
When the display rings, the display will light up.
4 | Topcom Fidelity 1081 |
