34 35

Mira 200 Mira 200

ANSWERING MACHINE

Recording outgoing messages + messages : full digital
Recording capacity: 14 minutes
Outgoing message 1: outgoing message for answering with
possibility to record messages (max 25 sec.)
Outgoing message 2: outgoing message for answering without
possibility to record messages (max 25 sec.)
Messages: Recording time programmable 30 sec/1 min/2
min/ no limit
Number of rings: 1, 2, 3, 4, 5 or toll saver programmable
Remote control code : 3 digits programmable
Backup battery: 9 V
14. WARRANTY
The MIRA 200 has been manufactured and tested to offer you complete satisfaction.
TOPCOM secures this device against material and construction defects for a period of
12 months counting from the date the first user purchased it. The warranty is only
valid if the warranty card has been filled in duely, dated and signed. The warranty
card has to be sent back to TOPCOM within 10 days after the purchase date.
The warranty expires c ompletely if people other than our t echnical personnel have
repaired or modified the machine, or in case of improper maintenance.
The batteries and adaptor are not covered by the warranty.
If you find any defects during the warranty, please return the unit in its original pack-
ing, together with the warranty card and a photocopy of your purchase invoice, to the
TOPCOM sales department.
Any transport costs will be debited to the purchaser.
12. EXPLANATION OF SYMBOLS THAT CAN APPEAR ON THE DISPLAY OF THE BASE STATION
A n= Answering with possibility to record (see 9.3.)
n A= Answering without possibility to record (see 9.3.)
o F = Answering machine is turned off (see 9.3.)
P A = Pause (see 9.11.2.)
F u = Memory is full (see 9.13.)
L o = Backup battery almost empty (see 9.15.)
r r = Reset (reloading the standard settings) (see 9.16.)
r e = The answering machine is being operated from a distance
(see 10.)
- - = Room monitoring (see 10.)
In Programming mode:
r1, r2, r3, r4, r5, ts= Setting the number of rings (see 9.5.)
d0, d1, d2, d- = Recording time per message (see 9.6.)
C d = Remote control code (see 9.7.)
48, 72 = Setting the speech quality (see 9.8.)
13. TECHNICAL SPECIFICATIONS

TELEPHONE

F r e q u e n c y : 900 MHz
P o w e r : 10 mw
Transmission range: inside buildings - max 60 m
outside - max 300 m
Dialling system: Pulse/tone switch possible
M e m o r y : 10 memory numbers (speeddial numbers)
Power supply: Base station: adaptor AC 9 V 700 mA
Handset: NiCd - rechargeable battery: 3,6 V
Battery operating time: in standby +/- 30 hours
talk time +/- 5 hours
D i m e n s i o n s : Base station: +/- 165 x 170 x 50 mm
Handset: +/- 57 x 160 x 30 mm
W e i g h t : Base station: +/- 350 g
Handset: +/- 200 g (incl. battery)