•Now you can change the LAN settings:
ENGLISH
-The LAN IP address and Subnet mask can be changed.
-The router DHCP server can be Disabled / Enabled
-The DHCP range can be set.
-Click Next to proceed
•Now the WBR754 will try to detect your broadband connection type
•Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto detection has been successful )
-Select your Connection Type
-Click Next to proceed
-Obtain IP automatilally (DHCP client): this connection is mostly used for connecting the WBR754 to a cable modem.
-Fixed IP address: for connections with fixed WAN IP address.
-enter the WAN IP, Subnet Mask, Gateway and DNS addresses.
-Click Next to proceed.
Topcom Skyr@cer WBR 754 | 9 |
