MENU OPERATIONS

Motorized DiSEqC 1.2

If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions.

A. Satellite Name

Select a satellite name that will be used to identify a motor position.

B. Tuner Select

Select a tuner that is connected with DiSEqC 1.2 system.

C. Transponder

Select the transponder to catch the strong signal. Select the TP from TP list box to get the strong signal.

D. LNB Setting

Please refer to LNB setting of this chapter.

E. Motorized DiSEqC1.2

Select Enable or Disable. If you are using DiSEqC1.2 antenna, set to Enable.

F. DiSEqC Command Mode

Change the current mode between User and Installer modes.

-User: This mode is used to fine-tune the position of the motor for better reception.

-Installer: This mode is used to search for the position of a satellite manually.

G. Movement: In case of User mode, the movement is adjustable by fine-tuning.

In case of Installer mode, the movement is adjustable by East , West going command.

34