MENU OPERATIONS
A. Satellite Name
Press 
button to display the Satellite List Box. The list of Satellite is put in alphabetical order. Select one of the preprogrammed satellites that correspond to the direction of the antenna. If the desired satellite name is not in the list, then select Other.
B. Search Mode
There are 4 search modes, There are 4 search modes, Auto, Manual, Advanced and SMATV. The Auto mode enables you to search using the information the PVR has. On the other hand, you may need to know in advance the frequencies and the symbol rates before using the Manual mode. On the Advanced mode, enter the Audio PID, Video PID or the PCR PID. The SMATV mode is used to special purposes on satellite master antenna TV system.
C. Frequency
Select or enter the Transponder’s Frequency by using the numeric buttons on your RCU.
D. Symbol Rate
Enter the Transponder’s Symbol Rate by using the numeric buttons on your RCU.
E. Polarization
Choose the type of polarization, either the Horizontal or the Vertical.
F. Network Search
This Network Search item can be used if the Search mode is set to Manual or Auto. If the Network Search item is set to On and the NIT (Network Information Table) is available, the Transponder’s information can be found.
G. PID
This item is valid when the Search Mode is set to Advanced only.
Press 
button to enter Video, Audio and PCR PID’s.
1) Video PID
Insert the Video PID by using the numeric buttons on your RCU.
2) Audio PID
Insert the Audio PID by using the numeric buttons on your RCU.
3) PCR PID
Insert the PCR PID by using the numeric buttons on your RCU.
4) SAVE
32