Toro 20016 owner manual Removing the Mower from Storage

1.Loosen the handle knobs until you can move the upper handle freely (Figure 35).

Figure 35

2.Fold the upper handle forward as shown in Figure 36.

Important: Route the cables to the outside of the handle knobs as you fold the upper handle.

Figure 36

3. To unfold the handle, reverse the steps above.

Removing the Mower from Storage

1.Remove the spark plug and spin the engine rapidly using the starter to blow the excess oil from the cylinder.

2.Install the spark plug and tighten it with a torque wrench to 15 ft-lb (20 N⋅m).

3.Connect the wire to the spark plug.

13