Torus Power A024-HCB-A1AB manual Important Safety Instructions, 18 kg 39.7 lb, 32 kg 70.5 lb

Important Safety Instructions

CAUTION! To reduce the risk of electric shock and fire, do not remove the cover of this device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians.

CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operating, maintenance and servicing information in the manual accompanying the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.

CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.

CAUTION! To reduce the risk of electrical shock, ensure the voltage selector switch is selected to the appropriate supply voltage.

CAUTION! To reduce the risk of electrical shock, ensure the fuses are replaced with the appropriate fuse according to the unit markings.

1.Read Instructions—All safety and operating instructions should be read before operating the device.

2.Retain Instructions—The safety and operating instructions should be retained for future reference.

3.Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.

4.Follow Instructions—All operating and safety instructions should be followed.

5.Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.

6.Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.

8.Ventilation—The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its ventilation slots.

9.Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-generating devices.

11.Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.

12.Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.

13.Periods Of Non-Use—The device should be unplugged when not being used for extended periods.

14.Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the device.

15.Damage Requiring Service—The device should be serviced by licensed technicians when:

•The plug or power supply cord has been damaged.

•Objects have fallen or liquid has spilled inside the device.

•The device has been exposed to moisture.

•The device does not appear to be operating properly or exhibits a marked change in performance.

•The device has been dropped or the enclosure becomes damaged.

16.Service—The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in fire, shock, or other hazards.

17.Do not position the equipment so that it is difficult to operate the disconnecting device (power cord).

18.If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

19.CAUTION Some of the units in this series are heavier than 18 kg (39.7 lb). Use safe practices when lifting.

￿18 kg (39.7 lb) ￿32 kg (70.5 lb) ￿55 kg (121.2 lb)

™ www.TorusPower.com

Owner’s Manual Power Conditioners Audio / Video Power Isolation Units Rack Mount / Standalone 04/07