Making a Copy From the Glass
Sheet Originals:
1. Raise the original cover or the reversing automatic
document feeder (optional), and place the original face
down on the glass.
y Raise it 60 degrees or more for detecting the original.
y A: Original
2. Align the original against the left rear corner of the glass.
3. Lower the original cover or the reversing automatic
document feeder (optional) slowly.
y When copying originals with high transparency,
such as OHP films and tracing paper, place a
blank sheet of paper, the size of the original or
larger, over the original.
y A: Original
y B: Blank sheet
Book-Type Originals:
1. Raise the original cover or the reversing automatic
document feeder (optional), and place the original in
the direction shown in the illustration.
y When using the Book-Type Originals to 2-Sided
Copies or the Dual-Page function, center the book
original on the yellow indicator line.
2. Lower the original cover or the reversing automatic
document feeder (optional) slowly.
y Do not try to force the original cover or the reversing automatic document feeder to fully
close over a very thick original, such as a big book. Copies can be made even if the
cover or feeder does not close fully.
y During copying, an intense light may leak out. Do not look at the original glass surface.