Making a Copy From the RADF
In the Continuous-Feed Mode:
1. After aligning the edges of originals, place the originals
face up and align the slides to their width.
y Align the originals in order from the top because they
will be fed from the top.
y One original sheet is also acceptable.
y Maximum number of sheets (all sizes) that can
be set in the reversing automatic document feeder:
100 sheets (13.3–20 lb.) or less than 0.6” in height.
y Use the original stopper as required.
TIP: When the number of originals is too large to be set
at one time, you can divide the originals into several sets
and set them one after another. To do so, place the first set
of originals first and press the CONTINUE button while
the scanning is in progress. After they have been scanned,
place the next set of originals.
In the Single-Feed Mode:
1. Align the slides to the desired original size.
2. Insert the original with its face up and straight along
the slides, it will be pulled in automatically. When the
original starts being pulled in, let go of it.